Steel wire rope claps

Steel wire rope clamp - Eureka

Eureka wire clamps are an alternative to press locks, and can be used for lifting with just one clamp. Eureka is approved by, among others, the Directorate for the Norwegian Labor Inspection Authority and DNV. NB! For lifts used for passenger transport, at least two clamps must be used.

Steel wire rope clamp - Iron Grip BG-100

The IronGrip BG-100 is the industry standard when it comes to on-site wire fastening.

Steel wire rope clamp - Iron Grip BG-S and BG-S SS

The upgraded BG-S model from Iron Grip now delivers an efficiency of 100% when using a single clamp. However, for suspension purposes, we recommend using two clamps with a spacing of at least three times the diameter of the wire between them. In dimensions of 3 mm, 4 mm, and 5 mm, the clamps will then meet the requirements of the standard for pressed terminations, NS-EN 13411-3.

Steel wire rope clamp - galvanized, DIN 741

Steel wire rope clamp - galvanized, U.S. Fed. Spec. FF-C-450

According to NS-EN 13411-5. NB! Do not use for lifting!

Steel wire rope clamp - stainless steel AISI 316, DIN 741