Adjustable beam clamp for use on angle iron. In accordance with NS-EN 13155:2003+A2:2009 and AS4991. Can be used between -50°C and +50°C without loss of strength properties.
A good plate clamp for lifting, 180° turning, and vertical movement of steel plates and structures. The IP10 is equipped with a mechanism that allows the clamp to be locked in both the open and closed positions.
A reliable plate clamp for lifting, 180° turning, and vertical movement of steel plates and structures. The IP10 is equipped with a mechanism that allows the clamp to be locked in both the open and closed positions
Tiger beam clamp BC is designed for vertical loads. It can be used between -50°C and +50°C without loss of strength properties. In accordance with NS-EN 13155:2003+A2:2009 and AS4991
Tiger beam clamp BCU is designed for both horizontal and vertical loads. It must not be used in the open position or as a plate clamp. It can be used between -50°C and +50°C without loss of strength properties. In accordance with NS-EN 13155 and ASME B30.20.
Horizontal lifting clamps spring, magnet, and handle. They are designed for horizontal lifting and transportation of non-deflecting plates. In accordance with NS-EN 13155 and ASME B30.20.
Your session has now expired. Please click "OK" to refresh the page and avoid any loss of unsaved data. If you were logged in, you will need to log in again.
Norwegian 
English 
